2014. február 20., csütörtök

Frequency Counter V2 13. - Populated

In the mean time all of the components (except the screws of the box) arrived.
I assembled one in its final format:

The following will come:
  • Finish the programing connector. I used the pinless, shifted hole programing connector on this design. It is not the first time, but the first occasion when I'll really using it
  • It has a power connector, but I was not able to find a plug to it on the first try at home, so I have to buy one and make a cable to it
  • If the whole stuff working then next will be the calibration
  • The software at 95% readiness level. I've to finish it

Nincsenek megjegyzések:

Megjegyzés küldése